Masonry repair
Sweep & inspection
Caps & crowns
Flue relining
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Mount Pleasant
If you’re searching for chimney repair in Mount Pleasant, the first thing worth saying is this: most of the work we do on chimneys here has nothing to do with creosote. It’s water. Salt air moves in off Charleston Harbor and the Intracoastal, tropical systems push rain sideways under low-profile caps, and condensers run hard eleven months a year while the fireplace sits cold. That combination rusts dampers, stains fireboxes, and leaves flues smelling like a wet basement.
We serve homeowners across Mount Pleasant, from the older cottages near Shem Creek and the Old Village up through Park West, Dunes West, and Carolina Park. Whether you’re in 29466 or closer to the water, the job usually moves the same way: we look, we show you what we found, then we quote the fix in writing. Call (866) 864-1983 and we’ll get you on the schedule.
Why Mount Pleasant Homeowners Call Charleston Chimney Cleaning for Chimney Repair
The reason people in Mount Pleasant call us back is usually simple: we treat a newer house like it still needs eyes on the chimney. A 2005 build in Carolina Park looks solid from the curb, and the chase cover on it may already be rusted through. We see it constantly, and we don’t tell you that’s normal and move on.
We’re the same company that inspects the chimney and performs the repair, so nothing gets handed to a second contractor who wasn’t there for the inspection. That single-source accountability is why our chimney repair calls often start as a routine sweep and end with a real fix the homeowner can see in photos. Homeowners searching for chimney repair companies in Mount Pleasant have plenty of options; what sets a company apart is being able to show the evidence and quote the repair in writing, and our team does both.
Our technicians have up to experience, work with HeatShield and DuraFlex liner systems, and supply Gelco caps and Olympia Chimney components. That matters here because factory-built fireplaces often need manufacturer-specific parts, not a generic cap from a hardware store shelf. We quote the job from a written estimate, so the number you agree to is the number you pay.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Repair Companies in Mount Pleasant
Chimney repair companies in Mount Pleasant spend more of their time on moisture systems than on sweeping – caps, chase covers, dampers, and crowns do the heavy lifting in this climate. A repair call here usually means something failed on one of those components, not that the flue is choked with soot.
When you get a written quote from us, a typical damper replacement in Mount Pleasant runs $250 – $550 depending on the firebox type and whether the original was builder-grade. A new cap and chase cover assembly typically lands between $300 and $800. Both are estimates; the written estimate sets the final price.
What a homeowner should expect from any repair call: a look at the chase cover from the roof, a camera run through the flue if the unit is factory-built, and a photo set showing the rust, water staining, or failed damper before anything gets quoted.
What a Repair Visit Covers
Every visit starts with an inspection of the cap, chase, damper, and firebox. If a moldy flue or failed damper shows up, we show you the photo and quote the fix in writing before any work begins. Nothing is recommended without camera evidence you can see for yourself.
When Repair Can Safely Wait
Not everything is urgent. A slightly weathered crown on a chimney you don’t burn in is often fine to monitor through the season. What we don’t recommend is leaving a rusted damper open and a cap missing heading into hurricane season – that’s the failure that compounds.
Chimney Masonry Repair in Mount Pleasant
Chimney masonry repair in Mount Pleasant is the other half of the work, and it’s more common than you might expect in a coastal town of newer homes. Stucco-clad chimneys in I’On and Old Village cottages with original 1940s – 60s brick both fail at the same place: the crown and the mortar joints where salt air and wind-driven rain do the most damage.
Typical mortar repointing in Mount Pleasant runs $500 – $1,400 depending on how much of the stack needs raking out. Spalling brick replacement usually falls in the $600 – $1,800 range for a partial rebuild of a damaged face. Chimney waterproofing is a smaller line item, typically $250 – $600, and it’s the one we recommend most often on stucco and brick chimneys alike. All figures are estimates; the written estimate sets the final price.
Repointing and Tuckpointing
Repointing replaces failing mortar in the joints; tuckpointing finishes the repair with a finer mortar line for a cleaner look. Coastal humidity eats soft mortar first, so we check the joints on every inspection. If the joints still pass the scrape test, we say so and skip the work.
Waterproofing and Flashing
Weatherproofing a masonry chimney keeps rain from soaking into brick and freezing inside the pores. Flashing repair at the roof line matters just as much – a small gap there puts water into the ceiling before you ever notice it at the chimney. We work with the six trade brands we’re authorized for, so the right sealant or cap actually matches the chimney.
Trusted Brands We Service in Mount Pleasant
We work with a fixed lineup of industry-trusted brands rather than whatever’s on the shelf at a hardware store. That includes HeatShield for liner resurfacing, DuraFlex for flexible liner systems, Gelco for chimney caps, and Olympia Chimney for specialty components. We don’t claim to stock parts or manufacture them ourselves – we source the right part for the job, order it, and install it to spec. That fast turnaround matters here because a Mount Pleasant factory-built fireplace can’t wait on a generic substitute that doesn’t fit the chase. For a full view of what we handle, our Mount Pleasant team covers inspection, sweeping, and repair.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Mount Pleasant Homes
- Rusted dampers and chase covers. Salt-air humidity and hurricane-season wind-driven rain do this even on houses built in the last fifteen years. A damper that won’t seal means warm humid air sits in the flue all summer.
- Mildew and mold in unused flues. The short, mild burn season leaves flues damp for months at a time. A musty smell in June is often a sign the cap allowed rain in and the flue never dried out.
- Water-stained fireboxes on factory-built units. The firebox can look fine from the living room while the chase cover above it has rust streaks. We check the whole assembly, not just the visible side.
- Failing builder-grade dampers. Original dampers on 1980s – 2000s construction tend to fail before the chimney itself does. Replacing one with the correct manufacturer’s part restores proper draft and keeps the water out.
Pricing for Chimney Repair in Mount Pleasant, SC
Pricing in Mount Pleasant is set by what’s actually wrong, not by where the house sits. The written estimate you receive is the final price, and it’s free to get one.
- Damper replacement: typically $250 – $550
- Cap and chase cover: typically $300 – $800
- Mortar repointing: typically $500 – $1,400
- Spalling brick repair: typically $600 – $1,800
- Chimney waterproofing: typically $250 – $600
Cost is driven by access, the height of the chimney, whether the unit is factory-built or masonry, and how much damage salt air and rain have already done. Factory-built units that need manufacturer-specific parts usually land on the higher end of the cap and damper ranges because the fit has to match exactly. Call (866) 864-1983 for an exact quote – estimates are free.
We Also Serve Cities Near Mount Pleasant
We also serve homeowners in Isle of Palms, Charleston, James Island, and Hanahan. The same coastal moisture problem shows up across those towns, and the same capped flues and rusted dampers follow. If you’re outside Mount Pleasant proper, we’ll still book the visit and quote the work in writing. Call (866) 864-1983 to get scheduled.
Serving Mount Pleasant, SC – Our Local Coverage Area
We serve Mount Pleasant and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Mount Pleasant
Yes, a chimney that’s never been burned still needs inspection and repair. A factory-built fireplace in a newer Mount Pleasant home can develop a rusted damper, a water-stained chase cover, or a mildew-smelling flue from rain intrusion even if you never light a fire. The cap and crown weather from the outside in, and an unused flue stays damp for months in the mild winter here.
Call (866) 864-1983 for a free estimate if the chimney in your newer Mount Pleasant home hasn’t been looked at since you moved in.
A low-profile cap with a full chase cover and a properly sealed edge is the best choice for Mount Pleasant’s hurricane season. The cap needs to resist wind-driven rain coming in at an angle, not just falling straight down. We install Gelco caps sized to the chase opening, with a lid that overhangs enough to keep sideways rain from running under it.
Call (866) 864-1983 for a free estimate on a cap that fits your chimney’s actual dimensions.
A damper that sticks, won’t close flush, or shows rust streaks on its surface usually needs replacing. Open the fireplace, look up at the damper, and check whether it seats fully and whether the metal is pitted or orange. A failed builder-grade damper lets warm humid air into the flue and lets cold air into the room when the fireplace is off.
Call (866) 864-1983 for a free estimate; a technician can confirm the part number from the unit’s label before ordering anything.
The musty smell in summer is usually moisture trapped in the flue, not smoke residue. In Mount Pleasant’s short burn season, a flue can sit cold and damp from spring through fall. Water that gets in through a gap at the cap or chase cover has nowhere to evaporate, so it feeds mildew, which you smell through the fireplace opening.
Call (866) 864-1983 for a free estimate; a camera inspection tells you whether the problem is the cap, the flue, or both.
Yes, an annual chimney inspection is still worth it even with a light burn season. The fires aren’t the whole story in coastal Mount Pleasant – rain intrusion, salt air, and long damp idle months do more damage to a newer chimney than a few December fires do. A yearly look at the cap, chase cover, damper, and flue catches the small problems before they become masonry work.
Call (866) 864-1983 for a free estimate and we’ll book the inspection at a time that fits your schedule.
Call (866) 864-1983 for a free estimate on chimney repair in Mount Pleasant. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We can also work with your insurer if a storm or water event did the damage.
Written by the team at Charleston Chimney Cleaning.