Masonry repair
Sweep & inspection
Caps & crowns
Flue relining
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Charleston?
Chimney repair in Charleston typically costs $250 to $1,200 for most common fixes, with a chimney crown rebuild running $400 to $900 of that total and a full stainless liner replacement climbing to $2,400 to $5,200. Small masonry work like repointing a few courses of brick usually lands near the bottom of the range. The written estimate sets the final price, and the actual number depends on how much of the chimney is damaged, what material it’s built from, and whether we can reach the problem without scaffolding.
We’re a full-service chimney specialist, which matters when a sweep turns up damage no one warned you about. We inspect it, we fix it. Same call, no second contractor to track down. Call (866) 864-1983 with the details of what you’ve got and we’ll set up a free estimate.
Key Takeaways
- Most Charleston chimney repairs run $250 to $1,200; full liner replacement is the expensive end at $2,400 to $5,200.
- Crown, flashing, and cap work causes most water problems in this climate, and each fix has its own price band.
- We work with DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield so the repair uses professional-grade parts, not hardware-store substitutes.
- Free estimates. Call (866) 864-1983. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
Chimney Repair Cost Breakdown (2026)
These ranges reflect the Charleston market for 2026. Every one is a typical estimate, not a quote. A technician looks at your chimney, measures what needs fixing, and the written estimate you get is what you pay.
| Repair Type | Typical Cost Range | What It Covers |
|---|---|---|
| Crown repair or rebuild | $400 – $900 | Patching cracks vs. full crown replacement with proper slope and overhang |
| Tuckpointing / masonry repointing | $250 – $700 | Grinding out failing mortar and repacking joints, usually the upper chimney stack |
| Chimney cap replacement | $180 – $450 | Gelco chimney caps and matching hardware, sized to your flue |
| Flashing repair | $300 – $750 | Resealing or replacing the water seal where chimney meets roof |
| Stainless steel liner replacement | $2,400 – $5,200 | DuraFlex flexible liner installed for the full flue run, sized to the appliance |
| HeatShield liner resurfacing | $1,800 – $4,200 | Proprietary resurfacing for a clay-lined flue that’s cracked but structurally sound |
| Firebox repair | $600 – $2,000 | Rebuilding firebrick and resetting the firebox floor |
| Damper replacement | $350 – $900 | Top-sealing or throat damper replacement, Olympia Chimney or comparable |
| Smoke chamber repair | $800 – $2,200 | Paraphrasing and reshaping the chamber above the damper |
What pushes a repair toward the top of a range? Extent of damage and access. A cracked crown that can be patched from the roof costs far less than one that’s crumbling into the flue and needs a full rebuild with new brick. Liner work dominates the upper end because the material is expensive and the installation is fussy: the liner has to be sized to your appliance, insulated, and connected top and bottom without crimping. On the lower end, tuckpointing a handful of courses looks cheap until you price out the height and the staging.
One honest note on the ranges: they widen on tall chimneys and on steep or high roofs. Charleston’s older homes often have tall masonry stacks rising above a roofline that was never built with easy access in mind. Getting a technician safely to the top can be a real cost driver, and it’s worth knowing before the estimate lands.
What Affects Chimney Repair Pricing in Charleston
- Chimney height and roofline access. A tall stack on a steep roof means more setup time and more safety rigging. If the work sits above an easy pitch, you’ll pay less. Getting to the crown is half the job.
- Construction material. Brick and mortar repair is a different job from a prefab metal chimney, and each has its own parts. We bring in Olympia Chimney or Famco venting when a prefab system needs a replacement component, which keeps the repair to the right spec rather than the nearest substitute.
- Moisture and water intrusion. In Charleston’s humid, storm-prone climate, water is the root of most chimney decay. A failing crown or flashing lets rain down into the masonry, and freeze-thaw over the winter spalls the brick. Fixing the source costs less than rebuilding what the water already ruined.
- Liner condition. A cracked clay tile is a safety issue, not a cosmetic one. If the flue lining has gaps, comb
What Our Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Adam Thompson"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Rachel Barrett"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Holly Brooks